N1mm logger macros serial#

These ports might include real serial ports, USB-to-serial adapters, and/or virtual serial ports created by software drivers (e.g. In this example, COM1, COM2, COM5 and COM10 were found by the program when the Configurer window was opened. This list displays all of the COM ports the program was able to open.The radio has two receivers and the program is configured for SO2V (Single Operator, 2 VFOs) with two Entry windows, one for each VFO/receiver. COM10 is connected to a TNC or terminal unit for RTTY. COM2 is being used for a Winkeyer for CW keying. COM6 is used for radio control of an Elecraft K3. This example screen shot shows a case in which three COM ports are being used. PortВ вЂ“ for each device that is to be connected via a COM port, the COM port number is selected in this column from a pull-down list:.Set up each port depending on what equipment is connected and enter the appropriate information.ДЄ more detailed explanation of each of the controls on this window follows. The program supports up to 8 serial ports, each of which can be anywhere in the range COM1-COM99, and 3 parallel ports (LPT1 вЂ“ LPT3).

If you do not have one of the items listed connected to a port, make sure the port selection is вЂNoneвЂ™ and the check boxes are not checked for that port. Set the values appropriate to your station. The Hardware tab is used to set up your radios, packet interfaces, telnet connections, CW/PTT/digital ports and the interfaces to other devices, such as SO2R controllers, multi-purpose interfaces, and keyers, if they require serial or parallel ports. You will see вЂњN1MM LoggerвЂќ with a Type of вЂњConfiguration SettingsвЂќ.

N1mm logger macros windows#

If you have not unchecked вЂњHide extensions for known file typesвЂќ in Windows Explorer Options, you will not see N1MM Logger.ini. The N1MM Logger.iniВ file contains the name of the database file you were last using, which the program will load when it is started, as well as the name of the current contest and other recently-opened contests. You will need to export them from that database and load them into another database before they would show up there. That means, for example, that function key definitions loaded or modified when you are using one database will only appear in that database. ini file, but in the database that was in use when you loaded them. Function key definitions, telnet clusters, call history, and country information are not saved in the. Be careful in setting up items on the different tabs, to be sure that you understand that the option you are choosing is what you want.Д¬onfigurer settings are remembered by the program in the N1MM Logger.iniВ file, which is in the N1MM Logger+ user files area. The Configurer has many tabs with program settings influencing all aspects of the behavior of the program. The Configurer is our name for the tabbed dialog that appears when you click Config on the Entry Window top menu, and then choose Configure Ports, Mode Control, Audio, Other.

Setup DX, DXpedition, and General Purpose Contests.

Windows вЂ“ Table of Contents View (long).

Call History and Reverse Call HistoryВ Lookup.

N1mm logger macros archive#

Archive Files (1/2021) вЂ“ N1MM on WindowsXP.